Commercial mineralogy laboratory · Canberra

X-ray diffraction and petrographic analysis you can put in a report.

Sietronics identifies and quantifies the minerals in rock, soil, clay, cement and industrial samples. Quantitative XRD uses Rietveld refinement in Siroquant. Standard results arrive in 1–2 weeks, or in 24–48 hours when expedited.

Powder XRD patternIllustrative example
Measured pattern Quartz positions Kaolinite positions
Each mineral leaves its own set of peaks. We match them to identify the phases, then refine the whole pattern to report how much of each is present.
1–2 weeks Standard XRD turnaround from receipt
24–48 hours Expedited XRD, at an extra charge
About 1 g Sample needed for routine XRD
Since 1978 Founded as an offshoot of the ANU

How long do results take, and how much sample do you need?

Turnaround is counted from the day your samples arrive at the lab.

TestStandard turnaroundSample required
XRD, crystalline minerals 1–2 weeks (24–48 hours expedited)About 1 g. Milligram samples on a low-background holder.
XRD, clay analysis 1–2 weeksAbout 20–60 g, depending on clay content
XRF, major elements 2–3 weeksAbout 0.4–5 g of powder
XRF, trace and semi-quantitative 2–3 weeksAbout 2–5 g
Laser particle sizing 1–2 weeksAbout 1–20 g
Petrography 4–6 weeksA fist-sized sample is ideal
SEM Depends on the applicationChip of 15 mm or less that can withstand vacuum

How do I submit samples?

  1. Step 1 Tell us they are coming Email or phone the lab before you send anything, so we can confirm the right tests.
  2. Step 2 Include a test request Add a purchase order or test request form listing sample numbers and the tests required.
  3. Step 3 Label, seal and send Attn: Lab Manager, Sietronics Pty Ltd, 40 Hoskins Street, Mitchell ACT 2911, Australia.
  4. Step 4 Receive your report We prepare, measure and interpret the samples, then send your report. Template reports are on the Downloads page.

Sending from overseas? We accept samples from almost all countries. Contact the lab before shipping: some samples may need to be gamma irradiated on entry to Australia.

Common questions about XRD testing

What is the difference between XRD and XRF?

XRF measures elements, roughly fluorine to uranium, in percent or parts per million. XRD identifies the crystalline compounds those elements form and their percentages. Used together, they improve phase identification and quantification.

Is XRD destructive to my sample?

No. The measurement does not alter the material, though it generally needs a powder ground to about 50 microns or finer.

What materials can be tested?

Nearly any solid: soil, rock, clay and coal, and industrial materials such as residues, scale, cement and ceramic process materials.

How do you identify clay minerals?

We follow USGS guidelines, including glycolation and heat treatments at 400°C and 550°C. Kaolinite can be distinguished from chlorite, and from halloysite if needed.

Read all frequently asked questions →

A specialist lab with a long memory

Sietronics began in 1978 as an offshoot of the Australian National University and has run a commercial XRD laboratory since 2004. Our clients are mining companies, geotechnical consultants, universities and specialty materials manufacturers, in Australia and overseas.

The lab runs Bruker D8 ENDEAVOR and D2 diffractometers, with Rocklabs ring mills and a McCrone micronizing mill for sample preparation.

About Sietronics and our equipment →

Organisations we have worked with

  • ANSTO
  • GHD
  • WSP
  • Douglas Partners
  • Macquarie Geotechnical
  • University of Queensland
  • KIGAM

Request a quote

Tell us what the samples are and what you need to know. If you are unsure which test fits, describe the problem and we will recommend one.

+61 2 6246 9299 lab@sietronics.com.au 40 Hoskins Street, Mitchell ACT 2911