Chemical analysis by XRF, ICP-OES and combustion
Chemical analysis measures which elements a sample contains, and how much of each. Sietronics analyses almost all sample types, choosing the technique to suit the material and the elements you need reported.
Which chemical analysis technique do I need?
It depends on the elements of interest and the concentrations you expect. Tell us both and we will recommend the method.
X-ray fluorescence (XRF)
Which elements are present, and how much of each?
Qualitative and quantitative elemental analysis. The usual choice for major and trace elements in rocks, soils and industrial materials.
ICP-OES
What are the trace-level elements?
Identifies and quantifies elements from the sample's emission spectrum. A semi-quantitative scan covers about 70 elements and is used for metal samples.
Loss on ignition (LOI)
How much mass is lost on heating?
Thermogravimetric analysis: the sample is heated in a furnace and the mass loss recorded at set temperatures. Needed for accurate chemical analysis of many samples. Carried out as part of bulk chemical analysis, not as a separate service.
Combustion analysis
How much carbon, sulfur, nitrogen or oxygen?
The sample is heated to high temperature and the gases released are measured by infrared cells.
How does XRF work, and how is it different from XRD?
In XRF, a primary X-ray source excites the sample, which then emits fluorescent X-rays. The energy of each X-ray identifies the element, and the number of counts at that energy gives its concentration.
XRF reports elements. XRD reports the crystalline compounds those elements form. Two samples with the same chemistry can have different mineralogy, which is why the two are often run together.
| XRF | XRD | |
|---|---|---|
| Measures | Elements, roughly fluorine to uranium | Crystalline compounds (minerals and phases) |
| Reports | Percent or parts per million of each element | Phases present and the percentage of each |
| Typical sample | About 0.4–5 g of powder | About 1 g of powder |
| Standard turnaround | 2–3 weeks | 1–2 weeks |
| Used together | Chemistry constrains the phase identification | Mineralogy explains where each element sits |
How much sample is needed, and how long does it take?
XRF needs between 0.4 and 5 g of powdered sample, and results take 2–3 weeks from receipt.
| Test | Sample required | Standard turnaround |
|---|---|---|
| XRF, major elements | About 0.4–5 g of powder | 2–3 weeks |
| XRF, trace and semi-quantitative | About 2–5 g | 2–3 weeks |
| Loss on ignition | About 5 g | Reported with bulk chemistry |
| ICP-OES | About 0.4–5 g of powder | 2–3 weeks |
| Combustion analysis | About 1 g | 2–3 weeks |
Looking for laser particle sizing? See additional services.
Before you send samples: email or phone the lab, and include a purchase order or test request form listing sample numbers and tests. How to submit samples
Chemical analysis questions
Is XRF destructive to my sample?
No. It generally needs a powdered sample, ground to about 50 microns or finer.
What materials can be tested?
Nearly any solid: soil, rock, clay and coal, and industrial materials such as residues, scale, cement and ceramic process materials.
Why is loss on ignition needed?
Many samples lose mass when heated. Measuring that loss is needed for an accurate chemical analysis.
Should I order XRF or XRD?
Order XRF for elemental composition and XRD for mineral composition. Using both improves phase identification and quantification.
Request a quote
Tell us what the samples are and what you need to know. If you are unsure which test fits, describe the problem and we will recommend one.
+61 2 6246 9299 lab@sietronics.com.au 40 Hoskins Street, Mitchell ACT 2911